For citrus, apple, blueberry and other fruit orchards, we recommend 90–100 GSM PE woven ground cover fabric (also called weed mat fabric)
Width controlled at 1-3 meters, length 100 meters.
How to Choose GSM and Material
For most orchards, 90–100 GSM ground cover fabric is the best choice. It lasts longer than lighter 70–80 GSM fabric and costs less than heavier 110–120 GSM fabric, which most orchard rows do not need.
What Is GSM?
GSM represents the weight of weed-control fabric in grams per square meter.
And one of the most important specifications of a weed mat.
A higher GSM means thicker fabric that resists tearing and wear better.
Standard weights range from 70 to 120 GSM. Service life depends mainly on the material (PE or PP).
| GSM | Features | Selection Advice |
| 70-80 GSM |
Thinner and lighter lowest cost less resistant to tearing |
Seasonal vegetables, short-term projects and tight budgets. Not recommended for orchards |
| 90-100 GSM |
Good balance of thickness, strength and price |
Recommended for most citrus, apple and blueberry orchards |
| 110-120 GSM |
Thickest and strongest best resistance to tearing and wear |
Rows with frequent machinery or foot traffic, or stony ground |
What Materials Are Weed Mats Made Of?
Woven weed mats are mainly made of PP (polypropylene) or PE (polyethylene).
The main difference is service life and price: PE lasts longer, while PP costs less.
| Material | Features | Selection Advice |
|
|
Resists UV degradation
lasts about 5 years outdoors
costs about 10% more than PP. |
projects that need weed control for 4 years or more.
It costs a little more upfront, but you re-lay it less often,
the cost per year is lower. |
|
|
Less resistant to UV than PE Lasts about 3 years outdoors Lower price |
Low price the best choice for projects with a need within 3 years. |
How to choose between width and length?
The width of the weed-control fabric should be selected based on the row spacing of the fruit trees;
it is recommended to keep the width within 3 meters, with a length of 100 meters.
The weight of each roll shall not exceed 30 kg.
Width
The specific width should be chosen based on the row spacing between the fruit tree trunks.
length
For manual laying, choose a length of 100 meters; for mechanical laying, choose a length of 200–300 meters.
The choice of roll length is influenced by the following factors:
1. Laying method
For manual installation, a 100-meter roll is preferred (90 g/m², 3 meters wide, 100 meters long; weight: 27 kg per roll).
For mechanical (machine-assisted) installation, a roll length of 200–300 meters is preferred to minimize the frequency of roll changes (90 g/m², 3 meters wide, 300 meters long; weight: 81 kg per roll).
Roll weight (kg) = width (m) × length (m) × GSM ÷ 1,000
Example: a 3 m × 100 m roll of 100 GSM fabric weighs 3 × 100 × 100 ÷ 1,000 = 30 kg.
This is the fabric weight only; the core and packaging add a little more.
2.Tree row length
Choose a roll length close to your row length, or one that divides evenly into it, so you have fewer joins and less waste. Leave a little extra for overlaps and for burying the ends: for example, a 95 m row fits one 100 m roll, and a 190 m row fits two.
How much can a 40HQ container hold?
20FT container: 13 tons;
40HQ container: 26 tons.
Installation Tips
1. Clear existing weeds and level the strip.
2. Lay drip irrigation lines first, or run them along the edge of the fabric.
3. Pull the fabric tight and pin the edges with ground staples about every 1 m. Use more staples on windy sites.
4. Where two pieces meet, overlap them by 10–20 cm and pin through both layers.
5. Leave space around each trunk so the bark stays dry.
What to Send for a Quote
- Destination port
- GSM
- Material (PE or PP)
- Width
- Roll length
- Color
- Total area (m²)
Not sure yet? Send us your tree row spacing, row length and tree age, and we will recommend a specification.
| item | HELIO Standard |
| Material | UV-resistant PE or PP woven fabric |
| Weight | 70-120GSM |
| width | 0.5-6M |
| Length | 50/100/200/300M |
| Color | Black/white/green,etc |
| mOQ |
5,000 m² in stock; 20,000 m² available for custom order |
| Delivery Time |
7 days for in-stock items; 15 business days for production |
FAQ
What GSM ground cover fabric is best for orchards?
Most orchards use 90–100 GSM. For rows with frequent machinery or foot traffic, choose 110–120 GSM.
How long does ground cover fabric last?
PE lasts about 5 years and PP about 3 years, depending on sunlight, temperature and machinery traffic.
Which is better value, PE or PP?
PE costs about 10% more but lasts 2 years longer, so its cost per year is about one third lower.
Choose PP if you only need about 3 years of cover or upfront cost matters most.
Does water pass through ground cover fabric?
Yes. Rain and irrigation water pass through the weave to the roots, while the fabric blocks sunlight so weeds cannot grow.
How many rolls fit in a 40HQ container?
About 26 tons, which is about 860 rolls of 3 m × 100 m at 100 GSM. This is based on fabric weight only; we confirm the exact roll count with every quote.
Can you make roll lengths to match my tree rows?
Yes. We cut rolls to your row length, with a little extra for overlaps, to reduce joins and waste.



